AX90004
Axial Scorpion ARTR - 1/10th Scale Rock Crawler - Pre-built - No electronics
Discontinued
Ax90004_ax10scorpionxc1artr_950x450
The Axial AX10 Scorpion 1/10, 4WD Electric, R/C Rock Crawler ARTR (Almost Ready-to-Run). Just add your choice of electronics, and you'll be able to hit the rocks in shorter time than having to build your entire crawler.
Pre_prod_0301_470x289
Ax90004_side_470x289
Ax90004_sideview_articulate_950x340
FEATURES
The ARTR was designed from the ground up, and every detail was thought through to provide a competition level base kit to work with. Previously the only way to build a competition capable rock crawler was to buy bits and pieces of several different kits here'n'there. This long and sometimes frustrating process could take as long as several months just to get the right parts together before you could even start the build. Now you can get a factory built rolling chassis, and within approximately an hours build-time you'll be able to hit the rocks with your competition ready AX10 Scorpion rock crawler.
CHASSIS
The AX10 Scorpion chassis is lightweight and stiff.  Twin 2.5mm aluminum side plates are tied together with aluminum posts that create a rigid structure. The molded nylon skid/transmission plate is designed not only to be strong, but it's radius edges aid in preventing hang-up's on jagged surfaces. Additional design features include channeled grooves which assist in directional stability. Scale was also taken into consideration, and the chassis was made as small and compact as possible to cut weight as much as possible.  A simple, yet highly functional battery/radio tray makes installation of your electronics quick and easy.  Wheel base is adjustable from 304mm ~ 320mm.
Ax90004_axles_470x289
Front-axle-side_470x289
AXLES - PROVEN DURABILITY
The axles have been designed with many features that are not available from other products on the market.  Everything from the axle strength, pinion angle, caster, and ground clearance were taken into consideration when designing these axles. The result is a far superior axle that will stand-up to some severe punishment. To ensure added longevity from the start a hi-tolerance sintered diff locker is included along with hardened drive shafts.
Ax10_artr_fr_300x200
Ax10_artr_bk_300x200
Ax10_artr_side_300x200
BODY - DESIGNED SPECIFICALLY FOR COMPETITION
Designed from the get-go as a competition level rock crawling body to allow clearance where needed when crawling. Tapered front and rear it allows more articulation space: trim the fenders to allow for even more clearance. The side skirt acts as a skid plate when on the rocks and offers increased ground clearance.  Designed to give you the scale looks of a real 1:1 rock buggy. The XC-1 is manufactured in durable .040” polycarbonate which will stand up to abuse from all sorts of terrain
Ax90004_links_300x200
Ax30487
Ax90004_wheel_300x200
SHOCKS AND LINKS
Super long nitride coated shocks offer a wider range of articulation.  An optional range of spring rates allow you to custom tune your crawler to work on a wide range of terrain.  All suspension links are made from strong lightweight aluminum and anodized in orange.  Rear high clearance links are included to help increase ground clearance and prevent hang-ups.
TRANSMISSION
The AX10 Scorpion transmission was designed to place the weight of the motor as low as possible to maintain a low CG (Center of Gravity). The ultra compact transmission doesn't compromise performance because it also allows for a wide range of gearing choices.  The overall ratio can be adjusted from 15:1 all the way up to 74:1 using different pinion/spur gear choices which allows for super high speed or to competition level crawling speed.  The transmission is locked with no differential action which allows for both wheels to get the maximum amount of traction. The out-drive shafts come in a hard anodized aluminum for added durability.
WHEELS AND TIRES
No crawler would be complete without the essentials, and the AX10 Scorpion is outfitted with the popular 2.2 8 hole beadlocks sporting orange rock rings, and the Pro-Line Hammer™ tires.
The 2.2 8 hole beadlocks not only looks great but were engineered to meet the needs of competitive rock crawling.  Designed to fit most of the competitive tires available on the market, they are true beadlocks and require no gluing.  Made from strong composite materials to keep the weight low while still adding strength where needed.
REQUIRED ITEMS (not included)
Required_48x68_transmitter
Required_48x68_receiver
Required_48x68_motor
Required_48x68_battery
Required_48x68_charger
Required_48x68_esc
Required_48x68_servo
Required_48x68_aa_batteries
RECOMMENDED TERRAIN
Terrain_offroad_48x68
Terrain_mountainous_48x68
Terrain_rocky_48x68
AX90004
Bar_950x24
Axial Scorpion ARTR - 1/10th Scale Rock Crawler -Pre-built - No electronics
877493004545