 |
 |
| 2007/2008/2009/2010 Media - Press |
PLEASE READ FIRST: This page contains links to the full press release page that contains text and high resolution color photos. Click on each image to download a high resolution version that can be converted to work for your catalog or magazine.
PLEASE NOTE: Axial reserves the right to deny permission to use the information and images provided on the Press Release Page. |
|

|

| FEBRUARY - 2010 |
 |
| $299.00 |
|
|
|
|

| JANUARY - 2010 |
 |
| $50.00+ |
|
| SCX10 TR ALUMINUM LINKS UPGRADE SET |
| • Upgrades your SCX10 TR to all aluminum links |
| • Includes the hardware and links needed to upgrade to a 3 link OR 4 link setup using the 4 link mount included with the TR series of product |
| • Two different wheelbases available |
 |
|
|
|

| DECEMBER - 2009 |
 |
| $12.00+ |
|
| TUBE BUMPER AND MOLDED REAR CAGE |
| • Spare tire carrier/mount |
| • Realistic rear cage is triangulated and molded of strong durable composite material |
| • Molded composite tube bumper is strong and durable |
 |
|
 |
| $24.00+ |
|
| TRAIL HONCHO TRUCK BODY |
| • Realistic cab with composite plastic molded rear cage with realistic diamond plate bed insert |
| • Spare tire carrier/mount |
| • Made from durable .040” clear polycarbonate plastic for long life |
 |
|
 |
| $10.00+ |
|
| LED LIGHT BUCKET SET |
| • Includes 7 different styles of light buckets to hold 5mm and 3mm LED lights |
| • Realistic plastic lenses in clear and yellow |
| • Available in black and chrome |
 |
|
 |
| $2.50 |
|
|
|
|

| NOVMBER 2009 |
 |
| $275.00+ |
|
|
|
|
| SEPTEMBER - APPAREL - 2009 |
 |
| $12.00+ |
|
|
 |
| $25.00+ |
|
|
|
|

| SEPTEMBER 2009 |
 |
| $199.00+ |
|
| AX0331 - 28RR-2 |
| • 39000 RPM |
| • 18.25mm |
| • Composite 9.0mm 3 needle slide carburetor for improved performance at higher temps and quicker response (includes 8.0 and 8.5mm optional venturi’s) |
 |
|
 |
| $30.00+ |
|
| BEHIND THE AXLE (BTA) STEERING |
| • Complete set-up includes high clearance knuckles. |
| • Ackerman angles have been optimized to work with Axial CVD’s and the included bump stops prevent steering past the working angles of the inner axles. |
 |
|
 |
| $12.00+ |
|
|
|
|
|
|

| AUGUST 2009 |
 |
| $300.00+ |
|
| AX90012 - SCX10 TR (TRAIL READY) |
| • Complete ready to run out of the box |
| • 4WD |
| • 27T Electric Motor: Tear up the terrain in-door or out-doors. Easy Operation: No Tuning, No Fuel, No Loud Exhaust Noise. Just Plug'n'go! |
 |
|
 |
| $20.00+ |
|
| INTERIOR KITS |
| • Molded polycarbonate seat and dash fits the CF-100 body that is included stock on the SCX10 |
| • Includes stickers to detail the dash with your choice of three different styles |
| • Includes (1) AX80037 Interior Details Parts Tree – Black |
 |
|
 |
| $22.00+ |
|
| AX4010 - DINGO TRUCK BODY |
| • Realistic molded roll cage and fender flares are included with the complete body, molded in tough durable composite plastic |
| • Replacement polycarbonate body available without the molded cage and fender flares |
 |
|
 |
| Priceless |
|
|
|
|
| JUNE 2009 |
 |
| $40.00+ |
|
| AX0332 - AXIAL 32RR-1 ENGINE
|
• Based on our popular .28RR this engine is designed to be more efficient and output more power than the previous .32 engine while still delivering monster torque!
|
| • Reliable pull start – no starter box needed |
 |
|
 |
| $12.00+ |
|
| INTERIOR/EXTERIOR DETAIL KITS |
| • 3 different steering wheels to choose from |
| • 3 different types of mirrors with several wedges so you can fine tune the fit to your specific application |
| • Available in either Chrome or Black |
 |
|
 |
| $7.00+ |
|
| NVS NIGHT VISION SYSTEM
|
| •
The ultimate level in detail you can now add the NVS light system which features controls for headlights, tail lights, brake lights, and right/left turn signals, as well as some extra auxiliary lighting. |
 |
|
|
|

| MAY 2009 |
 |
| $50.00 |
|
| AX30092 - ALUMINUM 72-103MM SHOCK SET
|
| • Threaded shock body for easier pre-load adjustment |
| • Machined Delrin piston for silky smooth performance and less lateral movement |
| • 3.5mm titanium nitride coated (TiNi) shock shaft reduces lateral movement. |
 |
|
 |
| $6.00 |
|
| AX30527 - LEXAN UPPER LINK-PLATE |
| • Relocate electronics using the plate, helps lower center-of-gravity |
| • Lightweight lexan construction with overspray mask so you can leave it clear or paint it to match your truck |
| • Includes plate and 4 zip ties |
 |
|
|
|

| APRIL 2009 |
 |
| $485.00 |
|
| AX90011- AX10 SCORPION RTC (READY-TO-CRAWL)
|
| • Complete Ready-to-Crawl (RTC) out of the box |
| • 55T Electric Motor: Tear up the terrain in-door or out-doors. Easy Operation: No Tuning, No Fuel, No Loud Exhaust Noise. Just Plug'n'go! |
| • 72-103mm shock length, helps lower the center of gravity |
| • 3.5mm shock shaft reduces lateral movement |
 |
|
|
|

| JANUARY 2009 |
 |
| $30.00 |
|
| OPTIONAL GEAR SET
|
| • The lower gear range set reduces torque twist (43/13) |
| • The higher gear range offers higher top speed (36/14) |
| • Use the gears in different combinations front and rear to reduce torque twist in the rear and overdrive the front axle to help pull you through climbs easier |
 |
|
 |
| $36.00 |
|
| AX4009 - TRAIL RANGER BODY |
| • Made from durable .040” clear polycarbonate plastic for long life |
| • This body will fit the AX10 Scorpion, SCX10, Savage, T-Maxx, and E-Maxx monster trucks,. Minor modification will allow this body to fit on other monster trucks currently on the market. |
| • Overspray film and pre-cut vinyl window masks make painting fast and simple |
 |
|
 |
| $36.00 |
|
| AX4013 - CF-100 KUSTOM BODY |
| • Made from durable .040” clear polycarbonate plastic for long life |
| • This body will fit the AX10 Scorpion, SCX10, Savage, T-Maxx, and E-Maxx monster trucks,. Minor modification will allow this body to fit on other monster trucks currently on the market. |
| •Overspray film and pre-cut vinyl window masks make painting fast and simple |
 |
|
 |
| $8.00 |
|
|
|
|

| DECEMBER 2008 |
 |
| $40.00 |
|
| 61-90MM ALUMINUM SHOCK SET
|
| • Complete aluminum shock set for the SCX10 |
| • Threaded for easier preload adjustments |
| • True oil filled scale shock |
| • Dual rate springs |
 |
|
 |
| $10.00+ |
|
| SCX10 OPTIONAL ALUMINUM PARTS |
| • Direct replacement for the plastic parts on your SCX10 |
| • 6061 hard anodized aluminum |
| • Aluminum shock bodies offer smoother action and less wall flex |
 |
|
 |
| $75.00 |
|
| SCX10 FRAME SET |
| • Complete frame rails, cross bracing, radio box, and battery mount |
| • Easily convert your AX10 or any other axles to a more scale chassis |
| • Strong composite plastics |
| • Rigid steel C-channel rails |
 |
|
 |
| $5.00+ |
|
|
 |
| $6.00 |
|
| CARBON FIBER REAR AXLE BRACE
|
| • Adds rigidity to your AX10 3 link bracket on the rear axle without adding excess weight |
| • Aircraft quality 2mm carbon fiber |
| • Clean design cleans up the rear axle |
 |
|
 |
| $15.00 |
|
| CARBON FIBER BATTERY PLATES
|
| • Locates hump pack batteries onto the axle helping lower the center of gravity |
| • Allows multiple mounting options so you can adjust where the weight sits on the axle |
| • Uses the stock Velcro loops to hold the batteries in place, allowing for quick replacement when needed |
 |
|
|
|
| NOVEMBER 2008 |
 |
| $20.00 |
|
| BENDER CUSTOMS 4-LINK PLATE
|
| • Replaces servo plate on AX10 Scorpion and allows users to convert to a 4 link setup instead of the stock 3 link. 4 link suspensions offer the ability to adjust suspension geometry and limit torque twist. |
 |
|
|
| $7.00 |
|
| DRIVESHAFT RING W/SETSCREW
|
| • Prevents the driveshaft from popping off the metal yokes |
| • Grey anodized aluminum with laser etched logos |
| • Installs easily and quickly with setscrews to hold it in place |
 |
|
 |
| $25.00 |
|
| STEPPED BODY REAMER
|
| • Stepped reamer with dimension marks makes making holes in lexan easier than ever |
| • Measurements shown in standard and metric |
| • Cuts holes 0-14mm (0-9/16”) |
 |
|
|
|
|
|
| OCTOBER 2008 |
 |
| $450.00 |
|
|
 |
| $5.00+ |
|
| 1.9 8 HOLE BEADLOCKS
|
| • Realistic scale look, designed to fit popular 1.9 tire choices |
| • True beadlock - never glue again! Glue is for arts and crafts. |
| • Realistic hub cover fits over wheel nut and adds more realism to any scale build. |
 |
|
 |
| $5.00+ |
|
|
|
|
|
|
| SEPTEMBER 2008 |
 |
| $40.00 |
|
| AX10 SCORPION ALUMINUM AXLE PARTS |
| • Replaces the stock plastic C-hubs and steering knuckles for increased strength and more responsive steering |
| • Aluminum C-hubs are set at an increased castor angle to improve driveshaft angle while maintaining proper castor angle |
 |
|
 |
| $75.00 |
|
| AXIAL BAJA RACER BODY |
| • Photorealistic die-cut premium vinyl decals include window frames, headlight, grille, tail lights and more! |
| • Overspray film and pre-cut vinyl window masks make painting fast and simple |
| • Dimple marks for body post drill locations |
 |
|
|
|
| AUGUST 2008 |
 |
| $120.00 |
|
| BENDER CUSTOMS SWX CHASSIS KIT
|
| • Thick 3mm aluminum side plates provide a rigid chassis |
| • Delrin skid plate wraps under the side plates to help you slide over the rocks better |
| • The originator of the "open sided motor plate". |
| • Narrow chassis for squeezing through tight gaps |
| • Allows the use of most transmissions and dig units currently on the market |
 |
|
 |
| Priceless |
|
|
|
|
| JULY 2008 |
 |
| $35.00 |
|
| MACHINED HI-CLEARANCE LINKS
|
| • Heavy duty machined links add additional ground clearance and strength |
| • Available in 4 different colors (green, red, blue, and orange) |
| • Laser etched Axial logo |
 |
|
 |
| $18.00 |
|
| 55T ELECTRIC MOTOR |
| • Number of Turns: 55 |
| • Input Voltage: 4+ cells (12VDC max) |
| • Motor Size: 2”x1.4" (52x36mm) |
| • Shaft Diameter: 0.125" (3.2 mm) |
| • Shaft Length: .5” (12.5mm) |
 |
|
 |
| $4.00+ |
|
| GATE MARKERS
|
| • Perfectly sized for both 2.2 and mini rock crawler competitions |
| • Available in bright green and orange so you can differentiate between starting, finishing, and progress gates |
| • Size: 2” dia. x1” H (51.5x23.5mm) |
 |
|
 |
| $38.00 |
|
| TOOL TOTE |
| • High quality tool bag with space for a large range of tools |
| • Designed to fit Axial tools |
| • Made from a black padded material, will keep your tools protected when not in use. |
| • Features the Axial logo on the front and the Axial logo mark on the rear |
 |
|
|
|
| JUNE 2008 |
 |
| $20.00+ |
|
| AX10 SCORPION COLOR PACKS
|
| • Easily converts your AX10 Scorpion kit or RTR to any of the 4 aluminum colors available |
| • Available in green, blue, red, and orange |
| • Includes rear hi-clearance links |
 |
|
|
|

| MAY 2008 |
 |
| $475.00 |
|
| AX10 SCORPION ARTR
|
| • Pre-built version of the AX10 Scorpion Kit – includes all the aluminum links in anodized orange |
| • Pre-printed orange XC-1 Body |
| • Pro-Line M2 Hammers tires and Pro-Line memory foams |
 |
|
 |
| $35.00 |
|
|
 |
| $15.00 |
|
| AX10 SCORPION UPPER LINK PLATE
|
| • Relocate electronics using the plate, helps lower center of gravity |
| • Lightweight aluminum construction black anodized with laser etched logo |
| • Includes plate and 4 zip ties |
 |
|
|
|
|
|

| MARCH 2008 |
 |
| $43.00 |
|
| XC-1 ROCK CRAWLER BODY
|
| • Designed from the get go as a competition level rock crawling body to allow clearance where needed when crawling. |
| • Tapered front and rear end allows more articulation space – Trim the fenders for even more clearance. |
| • Scale looks to real 1:1 rock buggies. |
 |
|
 |
| $130.00 |
|
| 3XH PIPE |
|
• Includes 3 distinctive rear exhaust headers (medium torque, high torque, and high speed) so you can fine tune the performance to your driving style. Maximize your performance for any track or motor. |
| • Fits most 1/10th scale sedan and gas trucks. |
 |
|
 |
| $5.00+ |
|
|
|
|
|
|

| FEBRUARY 2008 |
 |
| $475.00 |
|
| AX10 SCORPION RTR
|
| • 2 configurations: Rock Crawler or Rock Racer |
| • 27T Electric Motor: Tear up the terrain in-door or out-doors. Easy Operation: No Tuning, No Fuel, No Loud Exhaust Noise. Just Plug'n'go! |
| • True Beadlocks: No Messy Glue! |
| • Hi-quality Composite Plastic and Metals |
 |
|
 |
| $33+ |
|
| PRE-PAINTED AND CLEAR BODIES |
| • Photorealistic die-cut premium vinyl decals include window frames, headlight, grille, tail lights and more! |
| • Made from durable 0.040" clear polycarbonate plastic for long life. |
 |
|
|
|



|
 |

|
|
 |