By AR on Dec 12, 2018

Axialfest 2019 UPDATE! We are working around the clock to make Axialfest 2019 the best one yet! We have some incredible plans in the works, but we’ve hit a bump in the trail. As you are likely aware, our longtime … more

AX90046 SCX10 II Jeep Cherokee Kit Build Series – Part 8

By Greg Vogel on Dec 07, 2018

We’re getting very close to finishing the AX90046  build series and by the end of this particular blog, you should be able to drive your truck if you’ve been following this series as you build. Here some of the final … more

AX90046 SCX10 II Jeep Cherokee Kit Build Series – Part 6

By Greg Vogel on Nov 13, 2018

Assembling the Wild Boar Driveshafts is a fairly simple task and should only take you a few minutes to complete. There are however a few tips we’re going to throw in to make sure the parts work well for those … more

AX90046 SCX10 II Jeep Cherokee Kit Build Series – Part 4

By Greg Vogel on Oct 29, 2018

We’re moving into a tricky area of our SCX10 II Build, the shocks. The AX90046  comes with the licensed Icon Vehicle Dynamics aluminum body oil filled coil-over shocks (AX30103) which are the preferred shocks for serious off-roaders. The shocks go … more

Customize Your AR44’s In Minutes

By Greg Vogel on Oct 22, 2018

One of the best parts to owning an Axial SCX10 II is your ability to customize it to make it your own. There are plenty of performance and accessory parts to choose from and in this blog we’re going to … more

How To: Install the AXI31555 Blazer Hard Top

By Tony Phalen on Sep 27, 2018

Axial’s AX90058 SCX10 II 1969 Chevrolet Blazer is certainly one good-looking ride, but the addition of the AXI31555 Hard Top is sure to catch the attention of many Blazer fans. In this article, we show you a step-by-step procedure on … more

Tips For Spray Painting Bodies

By Greg Vogel on Sep 21, 2018

A task simple for some can be daunting for others. Spray painting an RC bodies is one of those tasks. For those who have not painted a body before, you’ve found the right blog to read. We’re going to show … more

Tips To Assemble Beadlock Wheels

By Greg Vogel on Sep 14, 2018

Who loves assembling tires? Raise your hand! Stop raising your hand, we can’t see you. Glueing or assembling tires on beadlock rims is not among the favorite build tasks of an RC machine. Perhaps that is why most RC manual writers … more

Build The Perfect King Shocks

By Greg Vogel on Sep 07, 2018

When it comes to building shocks on an RC kit, many builders start to cringe. It’s not a favorite task for many, however building your shocks properly is a must if you want your suspension to perform. We’re working on … more

How To: Low Cost Blazer Tail Lights

By Greg Vogel on Aug 10, 2018

The AX90058 SCX10 II 1969 Chevrolet Blazer has become an instant hit since it’s release and drivers all over are already taking it out to explore new trails and others are already customizing it with incredible scale detail. A few … more