SCX10 in the Sand

By Axial Staff on Jun 03, 2009

I threw a set of Pro-Line Sand Paw paddle tires on the scaler and went out to the wash near the office. High horsepower + 4wd + paddle tires = good times!! I can’t wait to hit the dunes out at Johnson Valley with it.
scx10-sand-043

scx10-sand-044

scx10-sand-045

scx10-sand-158

scx10-sand-069

scx10-sand-075

scx10-sand-151

scx10-sand-152

scx10-sand-153

scx10-sand-154

scx10-sand-155

scx10-sand-156

scx10-sand-142

scx10-sand-192

scx10-sand-391

scx10-sand-166

scx10-sand-162

scx10-sand-037

scx10-sand-038

scx10-sand-039

scx10-sand-040

scx10-sand-041

scx10-sand-042

scx10-sand-046

scx10-sand-047

scx10-sand-048


24 Comments:

  1. Default_avatar mark Posted on 2009-06-13 07:44:04

    what body are you using in the pictures

  2. Default_avatar Bender Posted on 2009-06-16 06:39:08

    It’s Axial’s Diablo body, Part # AX4002.
    http://axialracing.com/details.php?Id=3121

  3. Default_avatar charlie greenberg Posted on 2009-06-23 13:07:07

    that thing is sweet! how fast can it go?

  4. Default_avatar colin crowley Posted on 2009-06-28 16:52:28

    nice truck, just wondering if axial is going to make parts or make like a pre-runner edition of the scx10 very nice truck

  5. Default_avatar Alberto Jo Posted on 2009-06-28 23:36:30

    Nice ride, can you send pictures without the body on?

  6. Default_avatar Bender Posted on 2009-07-01 13:12:52

    Thanks. No plans to make an SCX10 pre-runner edition. This truck is basically a stock SCX10 with a few custom parts and some aftermarket Axial parts bolted up.

  7. Default_avatar Bender Posted on 2009-07-01 13:16:51

    It’ll probably go about 25mph max. Not super fast, but fast enough for some fun off road.

  8. Default_avatar UnderDog Posted on 2009-07-08 07:44:43

    Very nice truck, just wondering what gears u are using since u said it hits 25, i was looking for more top end but was looking at changing the motor but i would rather do gears

  9. Default_avatar Bender Posted on 2009-07-08 13:22:05

    I’m running a 23t pinion on a 12t motor with an 87t spur. It’s more of a high speed basher then a crawler. It can crawl but the motor heats up pretty fast. I could still get more top speed if I went to a smaller spur gear though.

  10. Default_avatar Bender Posted on 2009-07-08 13:23:04

    I’ll try and get a few pictures posted with the body off soon.

  11. Default_avatar nick Posted on 2010-02-13 15:49:27

    what 12 turn motor did you use in the truck?

  12. Default_avatar nick Posted on 2010-02-13 15:51:39

    also forgot to ask, did you use the stock speed controller (like the one in the TR model), or did you use something else. thanks

  13. Default_avatar josh stalker Posted on 2010-03-09 14:35:50

    That is a sweet truck.. looks like it rips… kinda reminds me of mine… i have the dingo trail truck with a brushless 9turn or 4400 kv motor 65amp speedo it rips to…. it is alot of fun up here in michigan… mud, snow, sand,

  14. Default_avatar Kash Posted on 2010-03-09 18:48:12

    Is it a stock axial 12t motor?

  15. Default_avatar Kash Posted on 2010-03-09 18:51:35

    I mean what brand is the motor?

  16. Default_avatar Bender Posted on 2010-03-10 08:40:14

    I used an old Novak Super Rooster in this truck.

  17. Default_avatar Bender Posted on 2010-03-10 08:40:29

    Nice!!

  18. Default_avatar Bender Posted on 2010-03-10 08:41:00

    It’s a 12t Traxxas Slash motor on 3S.

  19. Default_avatar michael Posted on 2010-05-03 16:48:04

    are those working fans? and where is the tire rack from or is that custom?

  20. Default_avatar Anthony Posted on 2010-08-01 09:46:13

    I was thinking of buying a SCX10 and but a Mamba Max 5700 and add some paddle tires on it for hill climb races. Do you think the 5700 is too much? Or, could I use a small pinion and larger spur to get around it?

  21. Default_avatar jeremy Posted on 2011-07-24 15:22:25

    What rims are you using

  22. Default_avatar Jeremy4@sympatico.ca Posted on 2011-07-24 17:25:54

    What size tires are they and what rims?

  23. Default_avatar Bender Posted on 2011-07-25 09:31:30

    Axial 2.2 8 hole beadlock wheels, in chrome.

  24. Default_avatar Bender Posted on 2011-07-25 09:32:13

    The rims are 2.2 Axial 8 hole beadlocks, with 2.2 Pro-line Sand Paw tires.

Leave a Comment:

Name
Email
URL (optional)
Content